Knit Picks Mighty Stitch Yarn

Knitting Gauge – What is it and Why is it so Important?

Simply put, knitting gauge (also called knitting tension depending where you live) is a sample of your knitting to find out how many stitches you get in one inch. And you do this by knitting up a gauge swatch (this is also called a tension square).

What A Knitting Gauge Swatch Looks Like

knitting gauge swatch

Pretty boring right?

But … by knitting this little tension square it will help you match the knitting tension you have with the gauge in your knitting pattern.

This is what it will look like in a knitting pattern:

Gauge 18 sts and 24 rows = 4 ins (10cm) with size 8 (5 mm) knitting needles in stockinette st.

Buy Knits for Pets

The knitting gauge is also listed to give you the freedom to choose another yarn if you don’t like the one in the pattern or you just want to try something else. And substituting yarn in a pattern is quite simple to do.

The first thing you need to do is check the yarn label on the yarn you want to use to make sure that it matches the knitting gauge in your pattern. Then make a swatch with your new yarn.

Note:  Just because the knitting pattern suggests certain knitting yarns and needles it doesn’t mean you have to use them. What is important is matching your knitting gauge to the pattern and if that means using a different size needle then go for it.

Why is Knitting Gauge so Important?

Because the size of the stitches matters a lot.

When you knit anything with shape like sweaters for instance, you want to knit the right size so it will fit. If your knitting is even off by half a stitch it could mean a sweater ends up being way too big or way too small.

Here’s an example:

You want to knit a sweater that is 40 inches around. The knitting gauge says you need 5 stitches per inch. With the correct gauge you can cast on 200 stitches and make your sweater.

(40 inches multiplied by 5 stitches per inch equals 200 stitches to cast on) This is the formula for knowing how many stitches you need on your needle.

(Inches times stitches per inch)

You don’t bother checking your knitting gauge and end up knitting with 4.5 stitches per inch instead. But you still cast on 200 stitches and knit your sweater. When you finish you will actually have a sweater that is 44.45 inches not 40 inches.

(200 stitches divided by 4.5 stitches per inch equals 44.45 inches) This is the formula for knowing how many inches are in a specific area of knitting (and only if you know your knitting gauge)

OK you may not mind a nice loose fitting sweater but what if it was the other way around and it ended up being 4 inches too small – hmm I wonder if it would stretch.

You see I’ve been there more times than I’d like to admit. I really know.

Checking the knitting gauge beforehand and switching to a smaller knitting needle could have saved the disappointment.

Why take the chance when it is so easy to adjust in the beginning?

What Does A Knitting Gauge Swatch Tell You?

Many things. You see a lot of things affect gauge like:

  • Yarn weight
  • Knitting needles (sizes and material of needle)
  • Stitch patterns – ribbing for instance goes in more like elastic when its knitted up
  • How tight or loose you knit

By knitting a swatch you can find out a great deal about the yarn itself and also about how you knit, things like:

  • If your yarn and needles match up to the knitting gauge in your knitting pattern
  • How well your stitch pattern shows up with the yarn you are using
  • Whether the color combination you chose works well
  • How tight or loose you knit. (This way you can adjust the needle size)
  • How easy the yarn is to work with. Some yarns look beautiful but are very difficult to knit with
  • A way to test and practice new stitches
  • Give you inspiration and ideas

Are There Knitting Projects That Don’t Need Knitting Gauge?

Yes. You can probably find lots of things: wash cloths, blankets, some knitted bags, afghans and scarves don’t necessarily need a gauge.

What Do You Do With all the Swatches? (Seems Like A Waste)

I know how you feel because I thought that way too but then knitting a sweater that doesn’t fit is a waste of time too. And disappointing.

There are some things you can do with that swatch (or swatches).
You can frog (unravel) it and use the yarn in your knitting project or save it and use it with something else. Or, you can save a bunch of swatches and when you have enough you can sew them up into a small blanket or throw, even a scarf.

 Create some swatch cards.  Pick up some recipe cards or something like it and write down all the knitting information you learned from that yarn.

Write Down Things Like: 

  • Name of yarn
  • Color
  • Fiber
  • Needle size used
  • Stitches per inch

Then mark down any notes you have or things you made with it. Punch a hole in the card and attach it to your swatch and store it. Have a file for all your knitting projects.

If you have two swatches you can sew them together and make a small bag with it, or a change purse, or something to hold your smaller knitting tools in.

Save it and use it for a patch pocket.

There are probably more things you can do too. Have any ideas?

Here’s Something I Did With One of my Swatches….

 

May seem a little silly but….I had a small plastic ice cream container and I was using it for small knitting tools.

The thing is I don’t really like plastic containers so I wrapped this swatch around it.  Ha..at least it looks prettier than the plastic container right?

How Do You Make A Gauge Swatch?

Take that great ball of yarn you have and your knitting needles and start knitting.

This is how I do it.

First, check to see what the knitting gauge is in your pattern. So let’s say it says:

18 sts and 24 rows = 4 inc (10 cm) with size 8 (5mm) needles in Stockinette st.

What this means is there should be 18 stitches in those 4 inches or 4 1/2 stitches per inch (18 divided by 4).

It’s always best to add more stitches than what the knitting gauge actually reads. Why? The edge stitches are just not reliable to get a good gauge of your knitting and the bigger the swatch the more accurate your knitting gauge will be.DIY Animal Lovies

So in this case I would cast on about 30 stitches. That way you will have enough space to get a good reading.

Work about 1 inch in garter stitch (knit every row) Then work in Stockinette st. (knit one row, purl one row) for about 5 or 6 inches. What I like to do is knit 3 or 4 stitches of garter stitch at each end of each row. That will help it to lay flat. When you finish knitting 5 or 6 inches knit 1 inch of garter stitch and cast off your stitches. This way it creates a nice frame to measure your stitches.

The best way to get an accurate measurement is to steam or wash your swatch. Watch out with acrylic yarns though. They don’t take to steaming but you can still wet or mist it. This is called blocking and it is a way to know how your fabric will look when it is washed. It also helps relax the stitches. If you ever plan on washing your knitted garment then you need to wash the swatch too. At the very least, give it a good does of steam. Let it dry and then you can measure the knitting gauge.

What You Need To Measure Knitting Gauge

knitting gauge

All you need is a stitch gauge or a plain ruler. I also use a calculator because I am terrible with fractions so I keep a little one in my knitting bag.

Measuring Your Swatch

knitting gauge

Lay your swatch out on a flat hard surface (not on your lap) and put your stitch gauge over your swatch without stretching the stitches in any way.

Then you just count those little V’s. Each ‘V’ is one stitch.

Count the stitches across and then count how many stitches are in the rows as well .

Here is a closer look at the stitches.

knitting gauge

Before I take the stitch gauge off (and this isn’t shown) but as an extra security, I measure 4 inches along the top of the stitch gauge  (outside the little slot ) and double check my gauge across the 4 inches as well just to make sure I have an accurate measurement.

And that’s it. Now you know how many stitches per inch you have and can check it with the knitting gauge in your pattern.

I have also included a very short video to help show you exactly how to count your stitches and rows using your stitch gauge.

I think this will help a lot. Boy, I sure wish they had videos when I was learning to knit. Enjoy.

Knitting Gauge Video


Now that you have a better understanding about knitting gauge where would you like to go from here? Maybe go on over to my knitting instructions page or maybe you’d like to try some of my easy knitting patterns.



Happy Knitting!

Find this page helpful? Please tell us and others by adding your own Comment below.

Need help? Please post all knitting questions in Our Knitting Community where I or another member will happily answer your questions. It's free to join.

Our Knitting Community   About Me  Contact Me 
 Privacy Policy   Terms of Service    Affiliate Disclosure
Copyright © 2011- All Rights Reserved. My Simple Knitting.

2 thoughts on “Knitting Gauge – What is it and Why is it so Important?

  1. Hello there, this page is so helpful to me. I have wanted to knit for several decades, but this gauge business has confused me and put me off. Now, with your help, it makes sense to me at last. Thank you!
    Donna (Australia)

    1. Hello Donna. Yay! I’m so glad my page helped you. And you’re very welcome. I totally understand what you mean. For years I avoided making anything that involved knitting gauge because I didn’t understand it either. I’m so happy it makes sense to you now. It makes knitting a lot more fun. Happy Knitting!

Leave a Reply

Your email address will not be published. Required fields are marked *